显示标签为“titanium melting furnace”的博文。显示所有博文
显示标签为“titanium melting furnace”的博文。显示所有博文

2017年5月25日星期四

Induction process and common failure analysis

Induction process and common failure analysis
Induction smelting step useful check single crystal furnace, try single crystal furnace before formal jobs, single crystal furnace, melting product sampling inspection, adjustment test, the use of single crystal furnace power security, after the completion of these steps can be omitted.
Should be reviewed by induction melting equipment, see if there are any obvious damaged parts, and then according to the requirements of specification to the trial operation, if after trial work is normal, you can begin to formal production, but also constantly in the process of production of check products, to see if some of the products, product quality is qualified, if the index is not up to standard, will adjust the machine quality is unqualified, until melting product quality up to par.
Common single crystal furnace fault are crystal rods, single crystal furnace crystal rod shaking machine can still functioning, but the production efficiency is low, induction smelting products quality is poor so in order to improve the efficiency of the induction melting and quality, not blind smelting, must inspect the single crystal furnace. The wafers shake to check the pull head, cooling system and vacuum system. If there is a problem with the pull head, repair the moderating mechanism or the rotating mechanism. If there is a problem with the cooling system and vacuum system, it is necessary to adjust the structure of the silicon and the heavy hammer. There is no problem if you examine these places, see if the inert gas such as argon flow inside the furnace, argon gas flow in the furnace, requires a modified single crystal furnace, the evenness of single crystal furnace thermal field distribution.

2017年5月19日星期五

The vacuum induction furnace USES considerations

The vacuum induction furnace USES considerations
In the process of induction smelting, be careful and careful. In the process of operation, you should pay more attention to the safety of the person and protect the equipment.
During vacuum induction melting operation part, should be carried out in accordance with the relevant operation process, if not in accordance with the operating rules, is easy to vacuum pump body is damaged, resulting in a serious accident, will not only harm health, life and damage to equipment will also have a certain role.
In smelting operation, should beware of electric shock, such as electrode, rotating electrode copper wires, copper power supply box with a certain capacity, so be sure to properly insulating protection, so it can avoid electric shock. At the same time also need to protect good eye, if the temperature is too high, need to cover the observation hole of the baffle, if is necessary, you will need to wear sunglasses.
In the process of smelting, be careful to maintain a good environment and be aware of ventilation, and the mechanical pump's windpipe is needed to reach the outside of the window. You also need to dry the floor and not allow water. In the process of smelting, the circulation of circulating water should be guaranteed.
After all the operation, if you need cooling water, it will take a period of time, usually two hours.
After a period of time in the use of vacuum furnace, vacuum furnace shall be clean, especially the dead Angle, easy accumulation of dirt, in the process of wiping the vacuum furnace to pay attention to safety. If the flammable liquid such as alcohol and acetone is used to clean the vacuum furnace, the body should be above the vacuum furnace.
In the course of operation, fire prevention should be prepared. In the course of operation, wear the work clothes and gloves. Masks, try not to reveal the skin.

2017年5月15日星期一

The vacuum furnace system is mainly composed

The vacuum furnace system is mainly composed

The vacuum furnace system consists mainly of vacuum system, heating system and relevant control equipment.
The vacuum system consists of mechanical pump, diffusion pump, main road valve, bypass valve and high vacuum damper. The mechanical pump is a crude vacuum device, which is powered by a three-phase ac motor, and the work and stop of the pump is realized through the contact of ac contactor. High vacuum oil diffusion pump for high vacuum device, with the former mechanical pump and diffusion pump oil level, and the function of electric furnace heating extraction of the high vacuum degree requirements, through absorption and disconnect ac contactor control the on and off of electric heating furnace, and then control the action of diffusion pump and stop.
Heating system is composed of heating power and heating element, heating power magnetic voltage regulator, using dc excitation power supply for contactless smooth stepless voltage regulation of load, the dc excitation power supply controlled by power governor, governor using temperature controller and power detected by thermocouple temperature current value and the difference between the set value, the PID arithmetic, the output of 4 ~ 20 ma dc signal, control magnetic voltage regulator of magnetic saturation voltage, and then according to the set temperature control curve of temperature controller to realize the heating current and temperature automatic control.
In the design of the distributed control system, make full use of the computer a powerful computing and data processing function, timely monitoring system working condition, especially the introduction of intelligent automatic setting of PID parameters, further enhance the control index of the vacuum furnace system.

2017年4月27日星期四

How many reasonable vacuum induction furnace quotation?

How many reasonable vacuum induction furnace quotation?
Vacuum induction furnace belongs to a kind of vacuum furnace, mainly by the effect of electromagnetic induction, creates an electric current in metal furnace charge itself, and then rely on the resistance of the metal charge itself, according to the joule - lenz's law, the electric energy into heat energy, thus melting metal. Because the vacuum induction furnace without pollution, environmental benefits is better, therefore, it is very popular with the consumers in the market. When consumer is buying the vacuum induction furnace, besides will focus on the quality of the products, for the product price is also very the attention of the market price of vacuum induction furnace above? Vacuum induction furnace reasonable price?
Now, vacuum induction furnace above the market price is very chaotic, there are some bad suppliers use inferior materials product, thereby reducing the product cost, thereby lowering the price of vacuum induction furnace, as a result, some consumers will choose cheaper products, thus caused the chaos on the market of vacuum induction furnace, the product quality is uneven, the price of the good and bad are intermingled. The market the vacuum induction furnace above the price is reasonable? How much is the vacuum induction furnace?
Actually, because the quality of the vacuum induction furnace and cost issues, in general, the vacuum induction furnace quotation above market should in 4-100000 yuan or so, but there is some price is thousands or even hundreds of, these products are advised consumers to choose carefully, because the quality of these products may have some defects, and, of course, can also be second-hand products, so consumers need to consider carefully.

2017年2月7日星期二

Said vacuum brazing furnace, induction furnace of actual use

Said vacuum brazing furnace, induction furnace of actual use
Practical applications of induction furnace
A, induction furnace used for heat treatment: all kinds of metal partial or whole quenching, annealing, tempering, diathermy;
Second, the induction furnace used for thermal type: the whole parts forging, forging, hot upsetting, hot rolling;
Three, induction furnace is used for welding, brazing of various kinds of metal products, all kinds of cutter blades, saw blade welding, steel pipe, copper pipe welding, the same dissimilar metal welding;
Four, induction furnace used for smelting metal: gold, silver, copper, iron, aluminum and other metal (vacuum), smelting, casting molding and evaporation coating;
Five, high-frequency heating machine other applications: semiconductor crystal growth, shrink fit, bottle heat sealing, toothpaste heat sealing, powder coating, metal implants plastic, etc

2017年1月9日星期一

Correct single crystal furnace is safe and efficient operation

Correct single crystal furnace is safe and efficient operation
Single crystal furnace operation is also a science, before the formal operation, we need to check whether the temperature inside the furnace is suitable feed, does not allow loading in high temperature, check on the single crystal furnace control device to run, all the equipment should be under normal circumstances can be switched on.
Before loading operation, check the need to install the material, not into large pieces of material, removed first, back to the same melting also want to take it out, after crushing smaller material can be normal use, to ensure the normal operation of the incoming request is higher in a certain degree of the crucible, does not allow low, quartz crucible wall should pay attention to cleanliness, can't touch or other contact. Select the crucible can't rotate.
Operating equipment should pay attention to not be sharp Angle of the cut, at the time of loading to should take put down gently, not careless rude, the operator should pass professional guidance, bring clean gloves can't again after contact in addition to material things, to ensure that the material is clean, serious and responsible operation, smooth material had better be to realize a successful placement. Chunks of material not only after crushing, but should be placed close to the wall, adding suitable amount of dopant rear can continue to put small pieces of material.

2016年12月19日星期一

Induction melting furnace in iron industry "charm"

Induction melting furnace in iron industry "charm"
In the iron industry, the two most commonly used to induction melting furnace were power frequency induction furnace and intermediate frequency induction melting furnace.
First for medium frequency induction melting furnace, its strong adaptability, the variety of burden or piece of degree is not very strict, so widely used in melting cast iron, its melting alloy cast iron, nodular cast iron and so on need induction smelting products are widely used in manufacturing.
Power frequency induction furnace melting slag is relatively slow, some are not suitable for slagging, production lack of flexibility, cold start need to start, but at the same time it makes heating and metal melting, uniform heating temperature, burning loss is small, can facilitate the regulation of iron liquid ingredients, small relatively dirty. So usually suitable for metals and alloys remelting and heating up.

2016年12月12日星期一

Technical characteristics of medium frequency melting furnace

Technical characteristics of medium frequency melting furnace
Medium frequency melting furnace for melting equipment in cast iron smelting and duplex melting has decades of history, China's manufacturing and labor frequency furnace and medium frequency furnace has a wealth of experience, in the power structure, frequency conversion technology, integrated control, circulating cooling technology and so on many aspects have made remarkable progress. Using medium frequency furnace melting and heat preservation of more and more manufacturers.
Medium frequency melting furnace features:
1) used for smelting medium frequency melting furnace, at present can be made in a single capacity also can achieve nearly tons, can meet the needs of the mass production. But many enterprises power capacity expansion is often difficult to overcome obstacles. Therefore, medium frequency melting furnace is more suitable for small and medium scale production.
2) commonly used medium frequency melting furnace to melt the various grades of steel and non-ferrous metals. Just for iron casting production, the adaptability of medium frequency melting furnace to product better than the cupola, medium frequency melting furnace can be a variety of high alloy cast iron smelting, such as high chromium cast iron.
3) medium frequency melting furnace are discontinuous melting, interval for a period of time to provide equal to furnace capacity of iron liquid, mode of production for stage duty, medium frequency melting furnace are more appropriate.

2016年11月16日星期三

Vacuum induction furnace processing technology

Vacuum induction furnace processing technology
Vacuum furnace according to the structure can be divided into vertical and horizontal two series, the series is divided into vertical bell lift and lift the bottom tray. Horizontal series of single structure and front and rear double open the door to open the door again two kinds of structure. Furnace adopt water-cooled wall structures.
Heating equipment to protect the greenhouse adopts full metal type and compound two to choose from, all metal type of heat-resisting stainless steel and molybdenum screen; Compound of heat-resisting stainless steel, molybdenum screen and carbon felt, mullite fiber or silicate fiber composition. The specific choice depends on the user's process conditions and the requirement of process environment.
Heater is nichrome wire (belt), molybdenum wire (belt, bar), several types such as graphite, specific choice depends on the user's maximum temperature. Heater distribution have heating type and all-round heating two all around, to ensure that the user requirements for uniform temperature in the vacuum furnace type.
Cooling system has roots blower external loop structure, centrifugal fan centrifugal fan outside loop structure, cold wall circulate in several types such as the structure, meet the requirements of different cooling speed.
Vacuum system with pump + + mechanical pump, turbomolecular pump, turbomolecular pump, mechanical pump, diffusion pump, roots pump and mechanical pump, roots pump + mechanical pump, low temperature condensate pump + several types such as mechanical pump, according to the ultimate vacuum index selection.
Imported intelligent temperature controller, temperature control can realize the automatic control of heating, constant temperature, cooling function; With process curve storage function, can store several different process curve; Have litre cooling speed is adjustable and accurate clock function, can also according to the actual temperature and set temperature and other parameters; A vacuum furnace operation and power-fail protection function. Has a perfect alarm and protection.

2016年11月9日星期三

Principle of intermediate frequency furnace by what job

Principle of intermediate frequency furnace by what job
How medium frequency melting furnace works, what is the principle of intermediate frequency furnace? , for example, put a metal cylinder has alternating medium frequency current in induction coil, metal cylinder has no direct contact with induction coil, electric coil temperature is very low, but the surfaces are heated to redness, and even melt, and the redness and melting speed as long as adjust the size and the strength of the current frequency can be achieved. If the cylinder on the coil center, surrounding the cylinder temperature is the same, the cylinder heating and melting did not produce harmful gases, light environmental pollution.
Here is to introduce: medium frequency melting furnace is a kind of will power frequency 50 HZ alternating current into intermediate frequency (above 300 HZ and 20 k HZ) power supply device, the three-phase alternating current (ac) power frequency, after rectification into direct current, then laid adjustable intermediate frequency electric current, direct current supply by capacitance and induction coil in through the intermediate frequency alternating current, generate high density magnetic field lines in the induction coil, induction coil, and cutting in cheng fang of metal materials, produce a lot of eddy current in the metal materials. The vortex also has some properties of intermediate frequency electric current, i.e., the metal itself free electrons in the resistance of the metal body flow to generate heat.

2016年10月23日星期日

Several advantages of medium frequency induction furnace

Several advantages of medium frequency induction furnace

1 simple, intermediate frequency induction furnace equipment. Compared with electric arc furnace, medium frequency induction furnace itself does not need large furnace equipment, don't need a large furnace equipment (such as hydraulic pressure, rotating mechanism, etc.), also don't require a lot of water cooling system, so its monomer equipment investment is relatively low, the equipment is simple and easy to master.
2, only has the function of the steel because of intermediate frequency furnace, no oxygen blowing in steelmaking process, so don't oxygen generator and other large equipment, it can also save money.
3, due to the small size medium frequency induction furnace, high low, so the factory also was much lower than other steelmaking workshop, therefore, its cost in the factory building construction is also less than other types of steelmaking plant.
4, small and intermediate frequency induction furnace capacity, production arrangement is more flexible, especially suitable for small single piece casting production.
5, in addition, power frequency furnace and its related technology level is low, short-term easy to grasp.
6, the most low-end products in the market demand is not high, the comprehensive cost of the intermediate frequency induction furnace is lower than other steelmaking process.

2016年9月19日星期一

Vacuum furnace maintenance technology

Vacuum furnace maintenance technology
Because the types and forms of vacuum heat treatment to protect a lot, so the maintenance and overhaul project each are not identical. Maintenance check content should be based on the stove technology file and can be divided into every furnace according to the actual needs, daily, monthly, every half a year and every year for the project. The following eight o 'clock every furnace are summarized, the daily repair and maintenance projects.
1. To have spirit town function of the air pump, should be in the daily check and according to the need to be open before blowing in 30 min, to eliminate the moisture in oil pump.
2. Regularly check the cooling water, compressed air, hydraulic system pressure and the flow of cooling water.
3. The oven door rubber seals and flange surface should be checked before care door, can't have sand and sundry, with thousands of net stretched cloth to wipe the rubber sealing ring and the flange surface, then evenly coated with vacuum grease rear can close the oven door.
4. The workpiece must be cleaned before charging. After oil quenching treatment should be soaked in oil of oil in the material box, carrying parts all clean.
5. The air-filled motor is generally used in vacuum can not start must be inflated to start and electric interlock protection device to protect.
6. Roots pump should be in above of 133 pa vacuum can start, also should have electric interlock protection device to protect.
7. To have compressed air piping, open the drain valve should be released water every day.
8. Often pay attention to the cooling water in and out of the water temperature indicator is normal, check the touch electrode joint, oven door, whether there are local in areas such as the transformer cooling water pipe temperature anomalies.

2016年6月1日星期三

Vacuum Induction Melting

Vacuum Induction Melting

Vacuum induction melting (VIM) utilizes electric currents to melt metal within a vacuum. The first prototype was developed in 1920.One of the only ways to induce a current within a conductor is through electromagnetic induction. Electromagnetic induction induces eddy currents within conductors by changing the magnetic field. Eddy currents create heating effects to melt the metal. Vacuum induction melting has been used in both the aerospace and nuclear industries.
History
E.F. Northrup built the first prototype of a vacuum induction furnace in 1920 in the United States of America. In 1923, German scientist Wilhelm Rohn continued to advance the VIM technology along with founding the Heraeus melting facility. Medium frequency furnaces were seen soon afterwards in England and Sweden in 1927.The process was initially developed to refine certain special metals such as cobalt and nickel. As these metals and alloys became more common, the process of VIM became more widely used. VIM now helps to melt a variety of metals for aircraft and nuclear applications.
Procedure
Vacuum induction melting uses currents within a vacuum to melt metal. VIM involves placing a core-less induction furnace into a vacuum chamber.The heat used to start the melting process comes from an induced current called an eddy current. The melting and casting operations are then carried out at low pressures to control the entire alloy chemistry process.
Uses
VIM was usually used for refining high purity metal and alloys. VIM is now becoming more popular due to the variety of uses now available. The commercial production of nickel titanium alloys utilizes VIM to its full extent. Other examples of using VIM include melting steels for nuclear applications, cobalt alloy for medical applications, and both high purity copper alloy and clean magnetic alloy for high permeability.The process of VIM can even begin electro-slag remelting, which can remelt electrodes.
Nickel titanium
VIM is the most widely used process for the production of nickel titanium alloys. When producing nickel titanium, the process of VIM using a hot graphite crucible sometimes causes carbon contamination which causes some of the titanium ions to form titanium carbide (TiC). These TiC particles change the transformation temperature along with the strength of the alloy. This is one drawback with the process of vacuum induction melting in graphite.

2016年5月27日星期五

Vacuum single crystal directional solidification furnace

                             Vacuum single crystal directional solidification furnace

Vacuum single crystal/directional solidification furnace is using the medium frequency induction heating to melt metals or alloys , specially designed holding furnace and cooling system are formed thermal gradient, By modern equipment directionally solidified and single crystal parts of the pull-down mechanism to get maximum temperature gradient and the formation of the solidification interface, it adopts a a structure specifically designed to meet the requirements of the temperature gradient.Application field:production of high-temperature aerospace materials.

2016年5月19日星期四

Vacuum Induction Melting

       
Vacuum Induction Melting
 
Vacuum induction melting (VIM) utilizes electric currents to melt metal within a vacuum. The first prototype was developed in 1920.One of the only ways to induce a current within a conductor is through electromagnetic induction. Electromagnetic induction induces eddy currents within conductors by changing the magnetic field. Eddy currents create heating effects to melt the metal. Vacuum induction melting has been used in both the aerospace and nuclear industries.
History
E.F. Northrup built the first prototype of a vacuum induction furnace in 1920 in the United States of America. In 1923, German scientist Wilhelm Rohn continued to advance the VIM technology along with founding the Heraeus melting facility. Medium frequency furnaces were seen soon afterwards in England and Sweden in 1927.The process was initially developed to refine certain special metals such as cobalt and nickel. As these metals and alloys became more common, the process of VIM became more widely used. VIM now helps to melt a variety of metals for aircraft and nuclear applications.
Procedure
Vacuum induction melting uses currents within a vacuum to melt metal. VIM involves placing a core-less induction furnace into a vacuum chamber.The heat used to start the melting process comes from an induced current called an eddy current. The melting and casting operations are then carried out at low pressures to control the entire alloy chemistry process.
Uses
VIM was usually used for refining high purity metal and alloys. VIM is now becoming more popular due to the variety of uses now available. The commercial production of nickel titanium alloys utilizes VIM to its full extent. Other examples of using VIM include melting steels for nuclear applications, cobalt alloy for medical applications, and both high purity copper alloy and clean magnetic alloy for high permeability.The process of VIM can even begin electro-slag remelting, which can remelt electrodes.
Nickel titanium
VIM is the most widely used process for the production of nickel titanium alloys. When producing nickel titanium, the process of VIM using a hot graphite crucible sometimes causes carbon contamination which causes some of the titanium ions to form titanium carbide (TiC). These TiC particles change the transformation temperature along with the strength of the alloy. This is one drawback with the process of vacuum induction melting in graphite.