2017年5月19日星期五

The vacuum induction furnace USES considerations

The vacuum induction furnace USES considerations
In the process of induction smelting, be careful and careful. In the process of operation, you should pay more attention to the safety of the person and protect the equipment.
During vacuum induction melting operation part, should be carried out in accordance with the relevant operation process, if not in accordance with the operating rules, is easy to vacuum pump body is damaged, resulting in a serious accident, will not only harm health, life and damage to equipment will also have a certain role.
In smelting operation, should beware of electric shock, such as electrode, rotating electrode copper wires, copper power supply box with a certain capacity, so be sure to properly insulating protection, so it can avoid electric shock. At the same time also need to protect good eye, if the temperature is too high, need to cover the observation hole of the baffle, if is necessary, you will need to wear sunglasses.
In the process of smelting, be careful to maintain a good environment and be aware of ventilation, and the mechanical pump's windpipe is needed to reach the outside of the window. You also need to dry the floor and not allow water. In the process of smelting, the circulation of circulating water should be guaranteed.
After all the operation, if you need cooling water, it will take a period of time, usually two hours.
After a period of time in the use of vacuum furnace, vacuum furnace shall be clean, especially the dead Angle, easy accumulation of dirt, in the process of wiping the vacuum furnace to pay attention to safety. If the flammable liquid such as alcohol and acetone is used to clean the vacuum furnace, the body should be above the vacuum furnace.
In the course of operation, fire prevention should be prepared. In the course of operation, wear the work clothes and gloves. Masks, try not to reveal the skin.

没有评论:

发表评论