2016年12月28日星期三

The preparation and production of induction melting furnace before use operation procedures

The preparation and production of induction melting furnace before use operation procedures
Preparation of the induction melting furnace before use
1. Check each distributor is normal.
2. Check the water, water pressure and flow rate is in line with the requirements.
3. Check the vacuum pump and vacuum system is normal.
4. Check the control cabinet and temperature measuring meter and the indicator light is normal.
5. The processed workpiece cleaned thoroughly with alcohol or gasoline
6. Artifacts in furnace, tooling, material basket, etc shall be clean and dry.
7. Vacuum cleaning furnace scale and sundry.
8. Use silk or wool fabric dipped in alcohol or gasoline wipe the oven door and furnace cover seal.
9. The workpiece is put should smooth and may not be in the running and scattered and crooked blowing process.
Induction melting furnace production operation procedures
1. The starting power supply, set the switch control cabinet in automatic control location.
2. Input the parameters of the process planning into the computer.
3. The workpiece with charging car smoothly away in furnace.
4. Close the oven door and lock (cover), to ensure the seal.
5. According to the technological requirements to choose good cooling medium and cooling method and pressure.
6. Press the cycle start button, equipment execution procedures: vacuum heating _ _ cooling automatically.
7. Check the equipment each system operation is normal, if there is any abnormal timely report the captain.
8. Before, we should restore the normal pressure in the furnace, the light is normal after open the oven door (cover).
9. When discharging, carefully operation, workpiece and tooling shall glory hole collision.

没有评论:

发表评论